6KCNFG

 

Windows®-based 6KCNFG Configurator Software lets you quickly and easily creates the SPS6000 System configurations required for your specific real-world applications. A “configuration” is a full set of parameters that instruct the SPS6000 system precisely how it is to collect and process sensor based data. In addition to general system communications protocols and security provisions, a configuration includes:

  • specific input-channel setup information such as slot “location,” filter characteristics (if applicable), and calibration values
  • tag-name specification of all analog outputs and logic I/O to be handled by each Analog Signal Processor Card
  • tag-name specification of all active function module inputs and outputs (analog and logic), plus specification of any other applicable function-module operating parameters

The Configurator is run on an external PC that communicates with the SPS6000 system through a standard serial-port interface. Once a specific configuration has been created and saved to the setup PC’s hard disk via the Configurator software, it can be downloaded to the SPS6000 for immediate implementation, or it can be kept on the hard disk for later use and/or revision. Any configuration can be printed out for hardcopy storage. If desired, the users can at any time upload the existing configuration of a connected SPS6000 system for viewing and/or editing.

Two Configurator features simplify the process of creating complete signal paths: AUTOCONNECT (“A/C”) buttons and POPUP TAG-NAME LISTS. Pressing the “A/C” button of an ASP analog input or function module analog output automatically connects that input or output to the next available ASP analog output, while pressing a function module logic output’s “A/C” button automatically connects that output to the next available ASP control output. For each tag-name entry field, the user can invoke a popup list containing any and all tag names previously entered into this configuration which may be legitimately entered in that field. Thus, for example, the popup list for an ASP analog input channel will contain any and all existing tag names that are allowed to serve as a terminating point for that input—that is, all previously entered ASP analog outputs and function module analog inputs not already connected to a source.

 
 
 

Help us serve you better!

Daytronic strives to continue serving customers in the best way possible. Help us improve your experience by taking a simple survey. Please choose the correct survey and take a few moments to complete it. Thank you!

Existing Customers New Customers ×