These pressure transducers offer an economical alternative with good performance for high-volume gage requirements from 300 to 10000 psi (21 to 700 bar).  Ranges below 300 psig are available on request (contact the factory for information).

Each unit is constructed of welded stainless steel for durability in dry rugged environments.  Both gas and liquid pressure overloads of up to 50% over capacity are safely accepted. 

General Specifications are given below.

515A Series

Measurement Type

Gage

Measured Fluids

Gas, liquid

Case and Wetted Parts Material

Stainless steel

Bridge

Four-arm bonded foil gages, 350 Ω nominal

Excitation

10 VDC

Output (nominal)

2 mV/V

Resolution 

Infinite

Accuracy 

±0.5% of full scale

Overload (safe) 

50% over capacity

Zero Temperature Coefficient 

±0.01% of full scale/°F

Span Temperature Coefficient 

±0.02% of full scale/°F

Compensated Temperature Range

+60° F to +160° F (+16° C to +71° C)

Operating Temperature Range

-65° F to +250° F (-54° C to +121° C)

Electrical Termination (standard)

3 ft. cable