Daytronic Corporation - LVDT Mounting Blocks

2000 Series

3000 Series

3KPlus Series

3500 Series

4000 Series

5D Series

System 10

MeasuringPad

SPS6000

SPS8000

Cards

Transducers

Software

[Top ]

Back to Transducer MODELS
(Go here to ORDER
THESE PRODUCTS)

Back to LVDT GENERAL PAGE

LVDT Mounting Blocks

Model MB-S (for small-diameter LVDT's)

Model MB-L (for large-diameter LVDT's)

Model MB-S for a 0.315" or 0.375" (8 or 9.5 mm) diameter LVDT
(the mounting example shown on the left uses fixing holes "B";
the example shown on the right uses fixing holes "A"—
see dimensional drawing, below)

Model MB-L for a 0.813" (20.6 mm) diameter LVDT
(minimum of two brackets recommended for LVDT
with stroke of ±0.5" (±12.5 mm) or more)

These sturdy mounting brackets are designed to bolt to a flat surface. The transducer is clamped by means of a cap head screw. Additionally, two cap head screws are provided with each unit for mounting.

Mounting Block Specifications [Top

]

Transducer Diameter

Model MB-S: 0.315" or 0.375" (8 or 9 mm)*
Model MB-L: 0.813" (20.6 mm)

Dimensions

Model MB-S