Daytronic Corporation - DC "SUM" Sealed LVDT Series

2000 Series

3000 Series

3KPlus Series

3500 Series

4000 Series

5D Series

System 10

MeasuringPad

SPS6000

SPS8000

Cards

Transducers

Software

[Top ]

Back to Transducer MODELS
(Go here to ORDER
THESE PRODUCTS)

Back to LVDT GENERAL PAGE

DC-Operated, Short-Stroke
Unguided Armature

"SUM" Sealed LVDT Series (DC)

Designed for use while submerged under fresh water and most other non-corrosive liquids and gases, these LVDT's are extensively used in industrial and R&D applications. They are designed to operate in pressures of up to 10 bar using the standard connector (optional electrical terminations allow up to 206 bar).

The welded stainless-steel body is hermetically sealed and has a cable exit which is double-sealed using an internal rubber gland plus a polyolefin shrink tube covering the cable and transducer body. An alternative MI stainless-steel sheathed cable option is available for use under high liquid pressures (as in soil testing apparatus, hydraulics, vessel studies, etc.)

General Specifications are given below.

Go to LVDT SELECTION GUIDE

DC "SUM" Series

Dimension "X" is at the Electrical Zero Position

LVDT Model	Nom. Linear Range (in. / mm)	Dimensions (in. / mm)				Total Weight (oz. / g)
		"L"	"X"	"D"	"A"
DSD200SUM	�0.1 �2.5	2.68 68	1.3 33	0.813" (13/16") 20.6	2.44 62	11 306
DSD400SUM	�0.2 �5
DSD600SUM	�0.3 �7.5
DSD800SUM	�0.4 �10

General DC "SUM" Specifications [Top ] (See also the statement on LVDT specifications)
Supply Requirements, SINGLE*	Using �5 VDC Output: +20 to +40 VDC, 30 mA Using 0-10 VDC Output: +24 to +40 VDC, 30 mA
Supply Requirements, DUAL	Using �5 VDC Output: �10 to �20 VDC, 30 mA Using 0-10 VDC Output: �12 to �20 VDC, 30 mA
Armature	UNGUIDED
Linearity (% error of full scale, worst case)	�0.5%**
Standard Output (in/out)	-5 to +5 VDC (+0%, - 5%) or 0 to +10 VDC (+0%, - 5%)
Output Fluctuation with Supply Fluctuation	�5 VDC Output: 1.25 mV/V, typical 0-10 VDC Output: 5 mV/V, typical
Output Load (minimum)	�5 VDC Output: 2 kΩ 0-10 VDC Output: 2 kΩ (10 kΩ when supply < 26 V)
Output Ripple	30 mV peak-to-peak
Output Bandwidth (electrical)	200 Hz (flat)
Output Impedance	2 Ω
Temperature Coefficient (Zero and Span)	�0.01% of full scale/�C (�0.005% of full scale/�F)
Operating Temperature Range	-51� C to +80� C (-60� F to +176� F)
Electrical Termination	6.5 ft. (2 m) shielded cable***
* Must be floating with respect to output. �0.25% and �0.1% linearity are optional on some models (contact the factory for details). * Longer cable available to order; alternative electrical termination optional (contact the factory).

[Top ]

� 1996, 2002 Daytronic Corporation