Daytronic Corporation - AC "SEM" Sealed LVDT Series

2000 Series

3000 Series

3KPlus Series

3500 Series

4000 Series

4500 Series

5D Series

5M Series

System 10

MeasuringPad

SPS6000

Cards

Transducers

DC Power SYSKON

Software

[Top ]

Back to Transducer MODELS
(Go here to ORDER
THESE PRODUCTS)

Back to LVDT GENERAL PAGE

AC-Operated, Short-Stroke
Spring-Extended Armature

"SEM" Sealed LVDT Series (AC)

Designed for use while submerged under fresh water and most other non-corrosive liquids and gases, these LVDT's are extensively used in industrial and R&D applications.

The stainless-steel body is hermetically sealed and has a cable exit which is double-sealed using an internal rubber gland plus a polyolefin shrink tube covering the cable and transducer body. An alternative MI stainless-steel sheathed cable option is available for use under high liquid pressures (as in soil testing apparatus, hydraulics, vessel studies, etc.)

General Specifications are given below.

Go to LVDT SELECTION GUIDE

AC "SEM" Series

Dimension "X" is at the Electrical Zero Position

LVDT Model	Nom. Linear Range (in. / mm)	Dimensions (in. / mm)			Max. Spring Force (oz. / g)	Nom. Sensitivity (V/V at f.s.)
LVDT Model	Nom. Linear Range (in. / mm)	"L"	"X"	"D"	Max. Spring Force (oz. / g)	Nom. Sensitivity (V/V at f.s.)
DS80SEM	�0.04 �1	2.28 58	0.45 11.5	0.315 8	5.3 150	0.07
DS200SEM	�0.1 �2.5	2.60 66	0.49 12.5	0.374 9.5	4.2 120	0.19
DS400SEM	�0.2 �5	2.86 72.6	0.54 13.7	0.374 9.5	4.6 130	0.36
DS600SEM	�0.3 �7.5	3.75 95.3	0.60 15.25	0.374 9.5	8.6 245	0.42
DS800SEM	�0.4 �10	4.21 106.5	0.75 19	0.374 9.5	7.4 210	0.58
DS1000SEM	�0.5 �12.5	5.08 129	0.85 21.6	0.374 9.5	7.5 215	0.78

General AC "SEM" Specifications [Top

]

(See also the statement on LVDT specifications)

Supply Requirements	0.5 VAC to 7 VAC (RMS), 2 to 10 kHz sinusoidal
Calibrated Supply (Excitation)	5 VAC (RMS) at 5 kHz sinusoidal, 30 mA
Armature	SPRING-EXTENDED
Linearity (% error of full scale, worst case)	�0.5%*
Phase Shift	Typically 10� at 5-VAC, 5-kHz excitation
Output Load (optimum)	100 kΩ
Temperature Coefficient (Zero and Span)	�0.01% of full scale/�C (�0.005% of full scale/�F)
Operating Temperature Range	-20� C to +125� C (-4� F to +257� F)
Operating Pressure	500 psi (sealed onto cable outer sleeve)
Electrical Termination	6.5 ft. (2 m) shielded cable
* �0.25% and �0.1% linearity are optional on some models (contact the factory for details).

[Top ]

� 1996, 2010 Daytronic Corporation