Front-End Solutions for Data Acquisition and Control Applications Daytronic Corporation Logo

Daytronic Product and Applications Descriptions and Information

- Request Full-Color Hardcopies Catalogs

- Step-By-Step Product Selection Guide

- Product Application Notes

Product Service and Support Information

Industry Reference Materials, Links and News

Download Product Documentation, Software and Other Materials

How To Contact Daytronic Corporation

Overview of the Daytronic Website

 

 
Model 10A64-8C
 Eight-Channel Voltage Conditioner

Input Type Description SPS6000 SPS8000 System 10
Voltage 8-Channel Voltage X-X
 X*X
 X*X


This general-purpose conditioner is similar to the Model 10A60-4, but allows low-cost input of up to eight miscellaneous external analog signals (rather than four). Although it has a narrower range of voltages and a lower common-mode operating range than the 10A60-4, it offers substantially higher internal accuracy (see Specifications). Unlike the 10A60-4, it has no auxiliary outputs from wire-wrap pins.

"Absolute" calibration may be used for a 10A64-8C channel if the parameter being measured is voltage itself. "Two-point" ("deadweight") calibration should be used if the voltage input signal is an analog of some other parameter that has at least two independently and accurately known calibration values.

Specifications:
  • Transducer Types: 2-wire DC voltage sources, grounded or floating, that provide their own power supply
  • Input Voltage Ranges: ±5, 10, or 20 V-DC; automatically selected- on an individual channel basis- when the channel is configured
  • Amplifier (per channel):
      Normal-Mode Range: ±20 V operating; ±50 V without instrument damage
      Common-Mode Range: ±20 V operating; ±50 V without instrument damage
      Common-Mode Rejection Ratio: DC: -100 dB; at 60 Hz, 1 kHz, and 3 kHz: -150 dB
      Input Impedance: Differential: 2 M-ohm; Common-Mode: 0.5 M-ohm
      Offset: Initial: ±0.01 mV; vs. Temperature: ±10 mV/°C; vs. Time: ±10 mV/month
      Gain Accuracy: ±0.02% of full scale
      Gain Stability: vs. Temperature: ±50 ppm/°C; vs. Time: ±20 ppm/month
  • Filter (per channel): 3-pole modified Butterworth; 3 dB down at 7.5 Hz; 60 dB down at 100 Hz
      Step-Response Settling Time (Full-Scale Output):
      To 1% of final value: 150 msec
      To 0.1% of final value: 190 msec
      To 0.02% of final value: 200 msec
  • Auxiliary Outputs: None


Daytronic Corporation Logo For complete Pricing and Ordering
Information, write us or call
Daytronic at 1-800-668-4745