General Description & Features

These rugged modular instruments ensure fast control response, true peak readings, and high-accuracy linearized analog output.  Digital scaling of zero and span provides direct readout in engineering units.

Simple front-panel push-button or RS232/RS485 setup lets the user customize each unit for a specific application.  Selective security lockout of the front-panel setup protects against accidental configuration changes and simplifies use by the operator.

The 2000 Series is designed for industrial installation.  Each unit is housed in a compact, rugged 1/8 DIN case of GE Lexan which fits in a standard 45 x 92 mm panel cutout and requires only 107 mm (4.2 in.) behind the panel (plus connectors).  The case is sealed to NEMA-4X (IP-65) requirements from the front to allow high-pressure washdown when panel-mounted.

All wiring is by removable plugs conforming to IEC950 safety standards.  Standard power and signal connections are via UL/IEC/CSA-rated screw-clamp terminals.  All output options are isolated from meter and power ground by 250 V-AC minimum.

Every instrument can be powered worldwide without changes to the supply (see Specifications).  Both the standard meter supply and the optional low-voltage supply are fully compliant with UL/IEC/CSA safety standards.  Both supplies have isolated 5, 10, and 24 VDC excitation outputs to power external sensors, transmitters, and up to four 350-ohm load cells.  In addition to the isolated excitation output, regulated 5 VDC at up to 50 mA is brought out and can be used to power external logic

Standard Features:

  • Signal Conditioning with patented high-speed "concurrent slope" A/D conversion and adaptive noise filter
  • 5- or 6-digit scalable LED display
  • NEMA-4X, 1/8 DIN front panel
  • Factory calibration of all ranges
  • Peak hold and auto tare
  • Front-panel setup with security lockout
  • Isolated 5, 10, and 24 VDC excitation supplies

Optional features:

  • Low AC or DC power level
  • Dual-setpoint controller board (contact or solid-state relays)
  • Isolated analog output (±10 V, ±20 mA)
  • Isolated digital communications (RS232, RS485)
  • Free Setup software available for instrument configuration, control, and data display

 

 
 
 

Help us serve you better!

Daytronic strives to continue serving customers in the best way possible. Help us improve your experience by taking a simple survey. Please choose the correct survey and take a few moments to complete it. Thank you!

Existing Customers New Customers ×