VK626

VK626

 

Programmable head-mounted transmitter, two-wire connection, HART version, electrically isolated

 

 

For use in process control systems (SPC, PLC). The SINEAX VK 626 converts the measured quantity (i.e. signal from a thermocouple or resistance thermometer) into a proportional, analog output quantity.

For installation in the terminal head of a temperature sensor DIN 43 729, shape B.

VK616

VK616

 

Programmable head-mounted temperature transmitter, two-wire connection 

 

 

The SINEAX VK616 is for installation into terminal housings at temperature sensors per DIN 43 729, type B.

VK616 converts the measured quantity (i.e. signal from a thermocouple or a resistance thermometer) into a proportional, analog output quantity.

VK615

VK615

 

Temperature transmitter, 2-wire

 

 

The SINEAX VK615 converts the signal of a Pt100 resistance thermometer into an analog, proportional output signal.

  • Head-transducer in 2-wire technology Mounting in a probe with form B head
  • Measurement input Pt 100 2/3-wire
  • fixed measuring ranges: 0..100°C, 0..150°C, 0..200°C, -30..70°C, -50..150°C
  • Output 4..20mA
  • Fine adjustment of zero and span possible
  • Protected against polarity reversal
  • Captive screws

VC603

VC603

 

Programmable transmitter/alarm unit

 

 

These devices convert the measured quantity (i.e. direct current or voltage, or the signal from a thermocouple, a resistance thermometer, a remote sensor or a potentiometer) into a proportional analog output quantity.

2 limit contact devices are also available for monitoring the measured quantity.

V624

V624

 

Programmable temperature transmitter, four-wire connection

 

 

The SINEAX V624 converts measured quantities (i.e. signal from a thermocouple or a resistance thermometer) into a proportional, analog output quantity.

Measured quantity and measuring range can be programmed with a PC: facilitates planning and project work, short lead-times, and minimal inventory

V611

V611

 

Programmable temperature transmitter, two-wire connection

 

 

The SINEAX V611 is a measuring transducer with 2-wire connection. It is suitable for temperature measurement in combination with thermocouples or resistance thermometers. Temperature sensor non-linearity is corrected automatically.

V610

V610

 

Temperature transmitter, 2-wire, for inputs Pt100 

 

 

SINEAX V 610 is a two-wire transmitter. It is designed for measuring temperature in combination with resistance thermometers Pt 100. Thermocouple non-linearity is automatically compensated.

The output signal is a current in the range 4-20 mA. The sensor circuit is monitored for open and short-circuits and the output responds in a defined manner if one is detected. The power supply (12-30 V DC) is connected together with the signal by the two leads connected to the measurement output (loop powered).

V608

V608

 

Programmable temperature transmitter, two-wire connection

 

 

The SINEAX V608 converts the measured quantity (i.e. signal from a thermocouple or a resistance thermometer) into a proportional, analog output quantity.

V604s

V604s

 

programmable multi-transmitter/alarm unit

 

 

Programmable Multifunctional Transmitter for currents, voltages, temperature sensors, remote transducers or potentiometers.

The VB604s is for top-hat rail mounting with the following main features:

V604

V604

 

Programmable Transmitter

 

 

These devices convert the measured quantity (i.e. direct current or voltage, or the signal from a thermocouple, a resistance thermometer, a remote sensor or a potentiometer) into a proportional analog output quantity.

Subscribe to RSS - TC
 
 
 

Help us serve you better!

Daytronic strives to continue serving customers in the best way possible. Help us improve your experience by taking a simple survey. Please choose the correct survey and take a few moments to complete it. Thank you!

Existing Customers New Customers ×