High Accuracy Option (0.1%) for the DS and DSD LVDT Transducers. Avaliable depending on Model. Contact the Factory for details.

Model 106 Contact Tip

Replacing the standard rounded tip on the DS200B or DS500, or on the long-stroke DS2000, this tip provides a precision ground-flat surface, 3/8" in diameter, for contacting rounded objects. 

Model MB-S   Mounting Block for Small diameter LVDTs

Model MB-S for a 0.315" or 0.375" (8 or 9.5 mm) diameter LVDT

These sturdy mounting brackets are designed to bolt to a flat surface.  The transducer is clamped by means of a cap head screw.  Additionally, two cap head screws are provided with each unit for mounting.

Model MB-L   Mounting Block for Large diameter LVDTs

Model MB-L for a 0.813" (20.6 mm) diameter LVDT (minimum of two brackets recommended for LVDT with stroke of ±0.5" (±12.5 mm) or more)

These sturdy mounting brackets are designed to bolt to a flat surface.  The transducer is clamped by means of a cap head screw.  Additionally, two cap head screws are provided with each unit for mounting.

The “M” option for the LVDT units will define a linearity specification of +/- 0.25% of full scale, or better. Option is dependent on the type and length of the transducer. Consult the factory for available models for the “M” option.

The “H” option for the LVDT units will define a linearity specification of +/- 0.10% of full scale, or better. Option is dependent on the type and length of the transducer. Consult the factory for available models for the “H” option.