5M78

5M78

 

The 5M78 delivers filtered analog output of ±5 Vdc, ±10 Vdc, 4-20 mA or 4-12-20 mA. The 5M78’s advanced analog design directly addresses the problem of measurement inaccuracy in industrial environments of high electromechanical noise. Exceptional signal stability and accuracy over a remarkably wide range of sensor inputs are achieved through:

5M70

5M70

 

THE 5M70 DIN CONDITIONER IS A LOW COST UNIT FOR DC BASED - FULL BRIDGE STRAIN-GAGES FROM 0.5 TO 10 mV/V and delivers a filtered analog output of ±5 Vdc, ±10 Vdc or 4-20 mA; switch selectable by the user. Advanced analog design directly addresses the problem of measurement inaccuracy in industrial environments of high electromechanical noise. Exceptional signal stability and accuracy over a remarkably wide range of sensor inputs are achieved through:

5M68

5M68

 

The 5M68 delivers filtered analog output of ±5 VDC, ±10 VDC or 4-20 ma, user selectable. The AC input may be either differential (floating) or grounded (single-ended). Exceptional signal stability and accuracy over an unusually wide range of voltage input levels configurations are achieved through:

5M64

5M64

 

The 5M64 delivers filtered analog output of ±5 VDC, ±10 VDC or 4-20 ma, user selectable. The DC input may be either differential (floating) or grounded (single-ended). Exceptional signal stability and accuracy over an unusually wide range of voltage input levels and grounding configurations are achieved through:

5M40

5M40

 

The Model 5M40 DIN conditioner is used with conventional frequency-generating transducers, such as tachometer pickups, turbine flow meters, transistor or logic-circuit drivers, and “zero velocity” (true digital output) sensors. The 5M40 will accept sine, square and irregular waveform inputs, plus TTL. The 5M40 delivers filtered analog output of 5 Vdc, 10 Vdc or 4-20mA, selectable. Exceptional signal stability and accuracy over an unusually wide dynamic range—down to 1.0 % of full scale—are achieved through

5M30

5M30

 

 The DIN Mount Model 5M30 is a high-reliability conditioner for measurement of displacement, force, pressure, and other parameters obtained with a linear variable differential transformer (LVDT) or other variable transformer transducer.  The 5M30 delivers filtered analog output of ±5 Vdc, ±10 Vdc or 4-20 ma; switch selectable.

5M14X1

5M14X1

 

A member of Daytronic’s new “M” series of enhanced conditioner modules the 5M14/5M14V provides linearization, stable amplification and proven filtering techniques for up to four thermocouples. This isolated, four-channel conditioner accepts real-world temperature signals from Types E, J, K, N, R, S, and T Thermocouples, producing accurately linearized output over the full TC ranges. All four channels of a given 5M14 module must be dedicated to the same TC type as selected by front panel dip switches.

5M14V

5M14V

 

A member of Daytronic’s new “M” series of enhanced conditioner modules the 5M14/5M14V provides linearization, stable amplification and proven filtering techniques for up to four thermocouples. This isolated, four-channel conditioner accepts real-world temperature signals from Types E, J, K, N, R, S, and T Thermocouples, producing accurately linearized output over the full TC ranges. All four channels of a given 5M14 module must be dedicated to the same TC type as selected by front panel dip switches.

5M14

5M14

 

A member of Daytronic’s new “M” series of enhanced conditioner modules the 5M14/5M14V provides linearization, stable amplification and proven filtering techniques for up to four thermocouples. This isolated, four-channel conditioner accepts real-world temperature signals from Types E, J, K, N, R, S, and T Thermocouples, producing accurately linearized output over the full TC ranges. All four channels of a given 5M14 module must be dedicated to the same TC type as selected by front panel dip switches.

Subscribe to RSS - DIN Mount
 
 
 

Help us serve you better!

Daytronic strives to continue serving customers in the best way possible. Help us improve your experience by taking a simple survey. Please choose the correct survey and take a few moments to complete it. Thank you!

Existing Customers New Customers ×