Every Model 4500 is suitable for panel mount or rack mount installation and enclosures. The mainframe can be easily mounted on a user's pre-cut panel as shown in the figure below or the user can mount the unit(s) using single or dual rack mount panels available from Daytronic (Model RMK- 4501 or RMK-4502 rack mount. The Daytronic rack mount units are for use in a standard industrial 19" rack cabinet with a height of 5.22 inches (13.26 cm). Panel cutout dimensions are illustrated in figure below. Mounting of the Model 4500 mainframe requires four # 10 or # 12 (5 or 6 I.S.O. metric).
Every Model 4500 is suitable for panel mount or rack mount installation and enclosures. The mainframe can be easily mounted on a user's pre-cut panel as shown in the figure below or the user can mount the unit(s) using single or dual rack mount panels available from Daytronic (Model RMK- 4501 or RMK-4502 rack mount. The Daytronic rack mount units are for use in a standard industrial 19" rack cabinet with a height of 5.22 inches (13.26 cm). Panel cutout dimensions are illustrated in figure below. Mounting of the Model 4500 mainframe requires four # 10 or # 12 (5 or 6 I.S.O. metric).
Folding bench top feet for the Series 4500 when the instrument is used on a table top or bench position. Tapped screw holes are located on the bottom, front section of the instrument for installation.
The Series 2000 meters are panel mounted using retractable mounting “ears” to compress the meter to the panel. Replacement mounting pawls can be ordered under the Model number 2kPMK.
