5M Series General Description & Features

Each 5M DIN Mount Signal Conditioner Module is a self-contained, manually configurable, analog Conditioning instrument with non-removable screw-terminal connectors. Every 5M module is specifically designed to condition the appropriate connected sensor for repeatable and accurate analog measurement results. They are ideal for critical monitoring operations and high-speed analog control loops. Gain, phase, excitation, filters, zero-span, and other critical characteristics are selectable per the front panel without the need to open the DIN case - allowing easy setup and configuration without the need for software or computer support.

• Housing Polyamide - gray, Inflammability class acc to UL94 V0
• Dimensions HWD: 99.0 mm x 22.5 mm x 144.5 mm
• Power Requirements 11-28 VDC 3.6 watts; (5M14 - 24 VDC +/- 10%)
• Analog Filters Selectable, Three Pole - Modified Butterworth - Low Pass, rolloff frequency varies with module
• Input Overvoltage Protection Up to 240 VAC rms on all signal and excitation lines
• ESD Protection per EN61000-4-2
• Accuracy Offset and Gain Stability ±30 ppm/Deg C; vs. time ±10ppm/month
• Gain Accuracy is limited to calibration source, 5M14 is ±0.02% of input range
• Operating Temperature Range -10° C to 70° C (14° F to 158° F)
• Analog Outputs Selectable ± 0 to 5 VDC or ± 0 to 10 VDC with linearity maintained for 20% overrange;
• 4-20 ma or 4-12-20ma; Thermocouple Module is model dependent for analog output
• Status Lights Power - green, Overange - yellow
• Power/Interface Connector Non- removable screw terminals; 16 positions; 12 to 26 AWG; DIN Rail Power connection on some models