Housing

Panel Mount; 4.7" H x 7.8" W x 6.6" D

Connectors

Removable screw terminal, provided  accommodates 16-28 AWG

Power Requirements

24 VDC ± 10%; 1.5 A max.

Input Overvoltage Protection (5D)

Up to 240 VAC rms on all Signal and Excitation lines

ESD Protection (5D)

Up to 4 kV on all connections

Isolation (5D)

1500 VAC between input and output terminals; 1500 VAC between I/O terminals and power supply/communications terminals

Operating Temperature Range

-10° C to 40° C (14° F to 104° F)

Operating Relative Humidity

5% to 95%, noncondensing

Analog Outputs

True Analog Output "B" from each installed 5D Module - Filtered ± 0 to 5 VDC with linearity maintained for 20% over-range; Four Independent DAC Output is generated by Channels 21 though 24. Calculated. alog output wiring using the standard module DB25 connector.± 0 to 5 VDC with linearity maintained for 20% over-range

Logic Inputs & Outputs

Eight Inputs & Eight Outputs, individually controlled. Nominal 0 to Vcc, where Vcc is 5 to 24 Vdc. Vcc= True condition (logic 1). Internal pull down resistor of 4.7K Ohm. All inputs assume Logic 0 state in the absence of connection. 

Display

1/4 VGA; LCD Color with touch over-lay; user configured pages (10 each)

Data Scan

10 KHz per channel

A/D

16 Bit; floating point; data fixed at +/- 8 characters

Accuracy

+/- 0.02% after calibration

Calculate Channels

16 user configured; fixed formula; cross channel calculations for Mulitply-Divide-Absolute-Average-Maximum-Minumum-Add-Subtrate-Timers

Communications

RS-232 Standard (fixed baud rate of 19.2Kbaud); Optional Ethernet (Model 4500i)